Intermec CK3A Instrukcja Użytkownika Pobierz pdf (Strona 59)

Chapter 2 — Connecting and Configuring the CK3

CK3 Mobile Computer User’s Manual 47

b Select Validate Server and press Enter. When the radio starts

to authenticate, the Network Password dialog box appears.

c Enter a User Name and Password and select Save Password.

d (Optional) In the Domain field, enter the Active Directory

domain associated with the user account.

e Press Enter.

8 Save your settings and exit Intermec Settings.

To enable WPA-PSK With Microsoft Security

1 Make sure the communications and radio parameters on your

CK3 are configured.

2 Start Intermec Settings.

3 Choose Communications > 802.11 Radio > Microsoft Security.

4 For Infrastructure Mode, choose Infrastructure.

5 For Network Authentication, choose WPA-PSK. Data

Encryption automatically defaults to TKIP.

6 For Pre-Shared Key, enter the pre-shared key or the passphrase.

The pre-shared key must be a value of 32 hex pairs preceded by

0x for a total of 66 characters. The value must match the key value

on the authenticator. The passphrase must be from 8 to 63

characters. After you enter a passphrase, the CK3 internally

converts it to a pre-shared key.

This value must match the passphrase on the authenticator.

7 Save your settings and exit Intermec Settings.

Configuring 802.1x Security With Microsoft Security

1 Make sure the communications and radio parameters on your

CK3 are configured.

2 Start Intermec Settings.

3 Choose Communications > 802.11 Radio > Microsoft Security.

4 For Infrastructure Mode, choose Infrastructure.

5 For Network Authentication, choose Open.

6 For Data Encryption, choose WEP.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 135 136

Brak uwag

Intermec CK3A Instrukcja Użytkownika Strona 59