Intermec PC43t Instrukcja Użytkownika Pobierz pdf (Strona 36)

Chapter 1 — About the Printers

22 PC23 and PC43 Desktop Printer User Manual

6 When you see the language you want to use, release .

7 The printer automatically reboots and starts in the command

language you selected.

Mount the Printer on a Wall

You can mount the printers vertically on a wall or other surface. The

printer must be mounted so the media output slot faces down. Use the

following guidelines for selecting a mounting location:

• Choose a location within 1.5 m (5 ft) of an electrical outlet.

• Choose appropriate mounting hardware (not supplied) for

the

mounting surface.

• The

mounting hardware must provide at least 6 mm

(0.25 in) of

clearance between the mounting

surface

and the bottom of the

screw head. The screw head

width should be 6 to 8 mm (0.24 to 0.33

in).

• Intermec recommends that you

use pan-head or flathead screws

with appropriate anchors for drywall, or for cement, concrete

block

, or plasterboard walls. Use wood screws only for wo

oden

surfaces,

and ensure the screw is long enough to be sunk to a

depth

of at least 12.5 mm

(0.5 in).

1 Choose the appropriate wall-mount template for your printer and

use the template to locate and drill holes in the mounting surface.

Caution: Be sure that the mounting surface can safely support the

weight of the printer.

Note: For mounting to wood surfaces, use a drill of 5 to 8 mm (0.2 to

0.3 in), or as appropriate for your mounting hardware.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 189 190

Brak uwag

Intermec PC43t Instrukcja Użytkownika Strona 36