Intermec CK3B Instrukcja Użytkownika Pobierz pdf (Strona 59)

Chapter 2 — Connecting and Configuring the CK3

CK3 Mobile Computer User’s Manual 47

for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must

be preceded by 0x and contain 5 or 13 hex pairs.

10 For Transmit key, choose the key you want to use for

transmitting data.

11 Save your settings and exit Intermec Settings.

Selecting Microsoft as Your Security Choice

The default security setting is Funk. If you want to use Microsoft

security, you need to select it as your security choice. After you select

Microsoft as your security choice, you will be prompted to save your

settings and reset your CK3 for your change to take effect.

With Microsoft as your security choice, you can configure:

• WPA.

• 802.1x.

• Static WEP.

To select Microsoft security as your security choice

1 Select Start > Settings > the System tab > Intermec Settings. The

Intermec Settings application appears.

2 Select Communications > 802.11 Radio > Security Choice.

3 From the Security Choice list, select Microsoft Security and save

your settings. An alert box appears telling you that you must save

your settings and warm boot the CK3 for the new security choice

to take effect.

4 Tap Yes. The CK3 resets and starts with Microsoft Security as the

Security Choice.

Configuring WPA Security With Microsoft Security

Use these procedures to set WPA-802.1x and WPA-PSK security on

your CK3 with Microsoft security.

To enable WPA-802.1x with Microsoft security

1 Make sure the communications and radio parameters on your

CK3 are configured.

2 Start Intermec Settings.

3 Choose Communications > 802.11 Radio > Microsoft Security.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 134 135

Brak uwag

Intermec CK3B Instrukcja Użytkownika Strona 59