Intermec CK3B Instrukcja Użytkownika Pobierz pdf (Strona 74)

Chapter 3 — Developing and Installing Applications

62 CK3 Mobile Computer User’s Manual

4 Using the stylus, press the Reset button in the battery

compartment.

5 Press and hold as you insert the battery back into the CK3.

6 Continue to hold until a Warning message appears.

7 Release , read the message, and press either button on the right

side to continue.

8 Perform the screen alignment and wait for the CK3 to load files

from the microSD card.

When the progress is complete, the CK3 warm boots to reset the

configuration.

9 Remove the microSD card and delete the files.

10 Set the date, time, and network communication parameters to

reestablish communications with the other devices in the wireless

network.

Upgrading the CK3 Using SmartSystems Foundation

You can use the SmartSystems console to upgrade the operating

system on your CK3. The console is part of SmartSystems Foundation

and is available from the Intermec web site through the Intermec

Developer Library (IDL). Before you can upgrade your CK3, you need:

• SmartSystems Foundation. To download SmartSystems

Foundation, go to www.intermec.com/idl and open the Device

Management page.

• the device upgrade .exe file. This file is available from the Intermec

web site at www.intermec.com. Go to Support > Downloads.

Make sure the file you select is for your language.

To upgrade the computer using SmartSystems Foundation

1 Install SmartSystems Foundation on your PC and open the

SmartSystems console.

2 Make sure the SmartSystems console and CK3 are on the same

subnet.

3 Make sure your CK3 is either in a communications dock or

charging dock or the device power management is disabled.

4 Download the device upgrade .exe file to your PC.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 134 135

Brak uwag

Intermec CK3B Instrukcja Użytkownika Strona 74