Intermec 741 (Windows Mobile 5.0) Instrukcja Użytkownika Pobierz pdf (Strona 25)

Chapter 1 — Using the Computer

741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 15

Aligning the Touch Screen

If the touch screen does not respond when you tap it with the stylus, you

may need to calibrate the screen.

To calibrate the touch screen

1 Tap Start > Settings > the Systems tab > Screen.

2 Tap Align Screen and follow the instructions to align the screen.

If the touch screen is so out of alignment that you cannot open the Start

menu, you may need to perform a clean boot. After the computer clean

boots, it prompts you to align the screen. For more information about

performing a clean boot, see “Clean Booting the Computer” on page 80.

Understanding the LEDs

The LEDs on the computer turn on to indicate the status of the battery, a

good read by the scanner, a shifted key, or a notification.

The battery status LED (B) and the scanning/keypad shift and

notification LED (C) turn red, green, or yellow to indicate the status of

the battery, scanner information, and the mode of the keypad.

Battery status

LED

Scanning, keypad

shift, and notification

LED

Battery Status LED

LED Color and Action Description

Steady green Battery is more than 95% charged and the computer is on the charger.

Blinking red Battery is low. The blinking speed increases as the battery power lowers.

Red Main battery is low; or if charging, remains red until your computer reaches a 95%

charge status.

Yellow The computer is on a charging source and there is no battery pack installed. The

computer may also be out of the charging range of 0° to 50° C (32° to 122° F).

When the computer is back in charging range, charging resumes and the LED

changes to red or green.

Alternating Red/Yellow Replace the battery pack.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 113 114

Brak uwag

Intermec 741 (Windows Mobile 5.0) Instrukcja Użytkownika Strona 25