Intermec 741 (Windows Mobile 5.0) Instrukcja Użytkownika Pobierz pdf (Strona 62)

Chapter 3 — Configuring the Computer

52 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual

5 For Association, choose WPA or WPA2.

6 For 8021x, choose None.

7 For Pre-Shared Key, enter the pre-shared key or the passphrase.

The pre-shared key must be a value of 32 hex pairs preceded by 0x for a

total of 66 characters. The value must match the key value on the access

point. The passphrase must be from 8 to 63 characters. After you enter a

passphrase, the 751 internally converts it to a pre-shared key.

This value must match the passphrase on the authenticator.

8 Exit Intermec Settings.

Configuring 802.1x Security With Funk Security

1 Make sure you have configured the communications and radio

parameters on your 751.

2 Make sure you have selected Funk as your security choice.

3 Open Intermec Settings.

4 Choose Communications > 802.11 Radio > Funk Security > Profile.

5 For Association, choose Open.

6 For Encryption, choose WEP.

7 For Authentication, choose TTLS, PEAP, or TLS.

If you choose TTLS or PEAP:

a Select User name and type your user name.

b Select Password prompt, and choose Enter password now.

c Select User Password and type a user password.

d For Validate Server Certificate, choose Enabled.

If you choose TLS:

a Load a user and root certificate on your 751. For help, see “Loading

a Certificate” on page 64.

b For Validate Server Certificate, choose Yes.

c You must enter a User Name and Subject Name. You can also enter

a Server Common Name if you want to increase your level of

security.

8 Exit Intermec Settings.

Note: You can use Prompt for password to troubleshoot your

connection to the network if you have problems.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 113 114

Brak uwag

Intermec 741 (Windows Mobile 5.0) Instrukcja Użytkownika Strona 62