Intermec 741 (Windows Mobile 5.0) Instrukcja Użytkownika Pobierz pdf (Strona 93)

Chapter 5 — Troubleshooting and Maintaining the Computer

741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual 83

The 751 indicates it is not

authenticated.

Make sure that:

• the User Name and Password parameters on the

751 must match the user name and password on

authentication server. You may need to reenter

the password on both the 751, authentication

server.

• on your authentication server, the user and

group are allowed and the group policy is

allowed to log into the server. For help, see the

documentation that shipped with your

authentication server software.

• the IP address and secret key for access point

must match the IP address and secret key on

authentication server. You may need to reenter

the IP address and secret key on both your

access point and authentication server.

• the authentication server software is running on

server PC.

You receive a message saying “The

server certificate has expired or your

system date is incorrect” after you

perform a clean boot on the 751.

Date and time are not saved when you perform a

clean boot. Reenter the date and time, and then

save your changes.

Problems While Configuring 802.1x Security (continued)

Problem Solution

Problems While Scanning Bar Codes

Problem Solution

You cannot see a red beam of light

from the scanner when you press the

Scan button and aim the scanner at

a bar code label.

You may be too far away from the bar code label.

Tr y.

You may be scanning the bar code label “straight

on.” Change the scanning angle and try again.

Move within two feet of a wall to test the effective

scan of the scanner.

When you release a Scan button or

handle trigger, the Good Read light

does not turn off.

The Good Read light will remain on if you

configure the computer to use continuous/edge

triggering. If you configure the computer for level

triggering and the Good Read light remains on,

there may be a problem. Press one of the Scan

buttons or pull the trigger again without scanning a

bar code label. If the light is still on, contact your

local Intermec representative.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 113 114

Komentarze do niniejszej Instrukcji

Brak uwag

Intermec 741 (Windows Mobile 5.0) Instrukcja Użytkownika Strona 93

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Palmtopy Intermec 741 (Windows Mobile 5.0)

Relacionado con productos y manuales para Herramientas Mtd 243-638-000